The Mechanical engineering, is plays a important branch role in the today's Technology so let's learn about Concept of Mcq on riveted joints - machine design that helps to modernize our society.
 |
| Mcq on riveted joints |
Multiple choice questions MCQ on riveted joints is as follows:-
a) Head
b) Shank
c) Point
d) Thread
Answer:- D
2. The transverse fillet weld are designing for the tensile strength.
A. True
B. False
Answer:- A
3.Which of the following option gives permanent type of joints.
A. Universal joints
B. Knuckle joint
C. Bolted joint
D. Riveted joint
B. Knuckle joint
C. Bolted joint
D. Riveted joint
Answer:- D
4.When plate thickness is about 16 mm, then for a joint the diameter of rivet is about..
A. 12 mmB. 20 mm
C. 24 mm
D. 30 mm
Answer:- C
5. The riveted joints, which of the following is material of rivets..
A. Ductile materials
B. Hard materials
C. Brittle materials
D. Low density materials
B. Boiler work
C. Both of the above
D. None of the above
A. Ductile materials
B. Hard materials
C. Brittle materials
D. Low density materials
Answer:- A
6. The riveted joint is a permanent type of joint.
A. True
B. False
Answer:- A
7. The brittle material is used to manufacturing the rivets.
A. True
B. False
Answer:- B
8. The tearing efficiency of riveted joint is about 35% then the diameteral ratio of rivets is...
A. 0.25
B. 0.55
C. 0.65
D. 0.95
B. 0.55
C. 0.65
D. 0.95
Answer:- C
9. The use of Diamond riveting is for...
A. Structure workB. Boiler work
C. Both of the above
D. None of the above
Answer:- A
10. The main plate in riveted joints failed due to which of the following....
A. Shearing
B. Compressing
C. crushing
D. Tearing
B. Pipe
C. Pressure vessel
D. Tank
B. Shank diameter
C. Length of rivet
D. Thickness of rivet
B. Costly
C. Medium costly
D. None of these
B. Permanent joints
C. Both permanent and temporary
D. None of these
B. Medium temperature services
C. Low temperature services
D. None of these
b) False
A. Shearing
B. Compressing
C. crushing
D. Tearing
Answer:- D
11. Main purpose of Riveted joints is used to joining of the..
A. StructureB. Pipe
C. Pressure vessel
D. Tank
Answer:- A
12. For structural work The diamond riveting is used.
A. True
B. False
Answer:- A
13. The main reason of failure of riveted joint is due to tearing of plates.
A. True
B. False
Answer:- A
14. The riveted joint is identified by which of the following type...
A. Types of loadB. Shank diameter
C. Length of rivet
D. Thickness of rivet
Answer:- B
15. The Riveted joint is .......than the other joints.
A. CheapestB. Costly
C. Medium costly
D. None of these
Answer:- B
16. The shank diameter is used to specify the riveted joint.
A. True
B. False
Answer:- A
17. Riveted joint is a cheaper joints than other joints.
A. True
B. False
Answer:- B
18. The tearing efficiency of riveted joint is about 25% then the diameteral ratio of rivets is...
A. 0.25
B. 0.55
C. 0.75
D. 0.95
B. 0.55
C. 0.75
D. 0.95
Answer:- C
19. If the diameter of rivet is 20 mm then thickness of plate is 30 mm.
A. True
B. False
Answer:- A
20. Riveted joint are.........
A. Temporary jointsB. Permanent joints
C. Both permanent and temporary
D. None of these
Answer:- B
21. The Riveted joints is best suitable for the..
A. High temperature servicesB. Medium temperature services
C. Low temperature services
D. None of these
Answer:- A
22. Aluminium alloys having poor weldability.
A. True
B. False
Answer:- A
23. Riveted joint is used for the aluminium alloys.
A. True
B. False
Answer:- A
24. The drilling is safer than the punching for hole.
A. True
B. False
Answer:- A
25. The Die is a part of hammer in the machine riveting.
A. True
B. False
Answer:- A
26. The hot riveting are subjected to compressive stress only.
a) Trueb) False
Answer:- B
Here we concluding, If you have any queries about the Mcq on riveted joints then feel free to comment below.
Here we concluding, If you have any queries about the Mcq on riveted joints then feel free to comment below.
0 comments:
If you have any doubt, please let me know